How Can You Fix A Leaky Bathtub Faucet?

How Can You Fix A Leaky Bathtub Faucet?

Over time, leaking faucets may cost you a lot of money in additional water bills, and the water continually trickling into your tub can create an unattractive stain. You may, however, be afraid to spend money on a plumber since you are aware of their high cost.

In truth, repairing a leaking bathtub faucet isn't especially difficult, and you should be able to do it yourself with a few essential tools. However, if you want to give it a shot, here's our step-by-step approach to repairing a leaking bathtub faucet.

Let us move forward and look at how some simple steps can help you get rid of the issues that are making you feel uncomfortable at your home itself. The bathtub faucet can be repaired easily and in the best manner to enjoy a calm aura all around you. 


It is more than an annoyance.

Many things can give you a headache, but the worst one is that you need to suffer from the sound of dripping water all day long. Just imagine the tapping sound of drops giving you a nightmare. There are many ways with the help of which you can get rid of your leaky bathtub faucet. If you are looking for them, then you are at the right place. 

We will help you understand everything and how you can replace the thing. This is a quick guide to help you understand how one can get the best ways of understanding in fixing the bathtub's faucet. You can enjoy this guide and then follow the steps for getting maximum results in the best manner. 

A leaky bathtub faucet is generally simple to repair. This article will walk you through the process of determining the source of the problem and repairing a leaky bathtub faucet without having to hire a plumber.

Screws are used to secure little washers to the stem's end. When you turn the faucet handle to the off position, the washers push on the faucet seat, stopping the water flow. All you need to do is follow this step very carefully so that there is no single glitch in the entire process of relaxing the bathtub faucet leakage. On a double-handle faucet, both the seat washers and the seats should be replaced regularly.


What is the leading cause of a leaky bathroom faucet?

Bathtub faucets come in various styles, from single-hole wall-mounted faucets to three-hole centre-set tub faucet spouts. The flow of water from the mixing valve into which the hot and cold water lines pass is controlled by a stem or cartridge.

A broken or worn washer in the stem is the most common cause of a leaky bathtub faucet. 

Let us go on and learn more about the ideas and methods that may be used to fix your faucet.

Make sure to turn off the water supply.

The first step is to turn off the bathroom's water supply. This shuts off the water supply to the house thoroughly. The shut-off valve is usually placed in the house's basement or crawlspace. Stop the water flow by turning the shut-off valve clockwise.

The shut-off valve may be situated outdoors where the municipal water meter is located in many residences. Use an adjustable wrench to twist the valve shut if it hasn't been turned in years.

Turn the lever (or handles) to the switched-on position once the water flow has been halted. Again, it is to make sure that the water in the tub does not leak at all.

Remove the handle of the faucet.

Next, disassemble the faucet to gain access to the faucet hardware and inspect it for wear and tear.

Remove the ornamental cap and remove the screws in the middle of the faucet handle using a screwdriver.

Pull on the handle to disconnect it once the screws have been removed.

Check all the parts correctly.

Examine the stem or cartridge and the interior of the handles after removing the handles to see how they're doing.

Examine the washer, the valve stem or cartridge, and the handle for any signs of wear or deterioration.

Now you have to remove and change the washer.

The washer is the exposed rubber component at the top of most faucet stems or cartridges. Because many washers are made for certain brands of stems or cartridges, you may need to have it examined to ensure that you obtain a compatible replacement with the faucet parts.

  • If the washer seems fractured or worn, it should be replaced.
  • To remove the screw that holds the washer together, use a socket wrench. 
  • If your tub faucet still leaks after replacing this part, the faucet stem may need to be replaced.

Do not forget to change the washer stem.

If changing the washer does not stop the leak, the problem might be with the stem or cartridge. If the stem or cartridge is the source of the problem, follow these procedures to stop it from leaking.

  • Remove any rust, wax, or caulk from the foundation.
  • To remove the bolts that keep it together, use an adjustable wrench. If the bolts are in the wall, remove them using a socket wrench.
  • Remove the stem and replace it with fresh bolts in the fitting. Because many stems or cartridges are only compatible with certain manufacturers of faucets, you may need to have them examined to ensure you obtain a new one compatible with the faucet parts.

Check the entire spout area.

Another cause of a leaky faucet might be a worn seal on the threads of a small piece of pipe going to the spout.

  • The faucet spout must be removed first. The spout is either a set-screw spout or a thread-on spout that may be screwed on and off. 
  • It's a set-screw spout if there's a tiny hexagon screw beneath the faucet. To remove the spout, unscrew the screw using a tool or socket wrench.
  • With a wrench, remove the length of the pipe known as a pipe nipple.
  • Wrap plumber's tape or Teflon tape over the threads on both ends of the nipple.


Easy alternate tips for fixing your leaky faucet

Although one drop of water may not appear to be much, a faulty faucet leaking one drop per second can waste almost gallons of water each year. More than a hundred conventional bathtubs could be filled with that much water! 

Your Tub Faucet's Washer Should Be Replaced

Bathtub faucet washers are often composed of plastic or rubber. Washers for bathtub faucets are frequently made of plastic or rubber. When the washers come into contact with water, they might dry up and crack over time, making a tight seal difficult to create. As a result, there are leaks. Of course, tightening the faucet can temporarily stop the leak, but this will merely increase the pressure on the old washer, leading it to wear out even quicker. The only long-term solution to this problem is to replace the washer.

Turn off the water supply.

It's challenging to perform any repairs while the tub is still filled with water. You may be able to switch off the water from under the sink in certain homes. If that isn't an option in your home, you may need to switch off the house's primary water supply while you work on the repairs. Turn the knobs of your bathtub faucet as if you were trying to run a bath once the water is turned off. Before you begin, this will allow you to drain any extra water from the pipes.

Remove the handles from the tub faucets.

Before replacing the washers, you must first remove the handles from your tub faucet. Then, with a pocket knife, pull off the handle inserts first. These coverings are attached to the handles. They're usually made of plastic and have markings on them that say "hot" and "cold."

After the inserts have been removed, each handle will have a screw. Remove the screws using a screwdriver. After the screws are removed, you'll be able to detach the handles from the stems. This is often the most difficult part of repairing since rust can cause the handles and stems to stick together. Consider utilizing a handle puller if you're having problems pulling them off on your own.

Try removing the washer.

Yes, this has to be your next step. Just remove the washer and the screw. Clean it nicely, and you can place it again or can buy a new one. This will help you understand the area that needs a check and then help you get rid of the problem in the best form. 

Reassemble it and put it through its paces.

Secure the handle inserts onto the faucet handles by screwing them into place. Please turn on the water supply and the faucet to test everything out after they're secure. There should be no water when you turn the faucet off again.



Grout problems, fractured pipes, and rust are a few additional frequent culprits that, if not addressed, can cause severe damage to your house. If you've changed the washer but your faucet is still leaking, it's probably better to call in an expert. Consider making an appointment to get any plumbing issues in your house fixed. This was everything you need to know about keeping your bathtub faucet restored perfectly. Follow our guide, and you can enjoy a silent bathroom in the best manner. Read on and do let us know how the experience of keeping our guide was.

Leave a comment

Please note, comments need to be approved before they are published.